Gate, barrier, garage door control with GSM and Cloud

GSM gate controller and communicator

GSM remote control and communicator with 1 input and 1 relay output, free call gate opening, SMS notification, and cloud remote control – for controlling gates, barriers, garage doors, and smaller home automation tasks.

• 1 optocoupler (voltage) input, max. 24 VAC / 35 VDC, NO/NC mode selectable
• 1 potential-free relay output (C/NO/NC), max. 230 VAC / 5 A load capacity
• Output control via free GSM call, bistable or monostable (1–65,535 ms) mode
• SMS notification when input status changes, with voice call alarm if required
• Output control from pre-saved (SIM-stored) phone numbers, with or without caller ID
• Cloud connection: Cloud Manager application and ascloudmanager.com web interface, with an unlimited number of users
• Easy setup with 4 DIP switches and SMS commands
• Power supply: 12–24 VAC or 10–35 VDC

GSM/GPRS (2G) Communicator

Choose the most cost-effective security communicator! The COM G — a MABISZ-compliant GPRS/GSM communicator — is the optimal solution for facilities where there is no wired internet connection, but 2G/3G network is available; it operates exclusively on GPRS/GSM mobile networks.

• The primary signaling channel is GPRS, providing immediate signal transmission.
• The secondary signaling channel is GSM.
• The secondary GSM channel can also operate in backup mode — in case of a faulty GPRS connection — or in parallel mode, where data transmission works simultaneously on both GPRS and GSM.
• The COM G is a high-level security solution in a cost-effective way.

Ultra compact GSM communicator just 61x31mm

• Miniature GSM communicator(6 x 3 cm)
• 2 contact driven output
• 1 Open Collector output
• It can be controlled either by SMS from unlimited phone numbers, or by voice call from 1000 phone numbers
• Forwarding SMS and voice message to 8 users
• Transmission to the monitoring station via GPRS
• Programming by SMS, PC, Android or by Voice menu

GSM gate controller and communicator

• 1 input optocoupler (voltage)
• 1 relay output 230VAC / 24VDC, NO/NC
• Output control monostable (65535 sec.) or bistable
• Power supply: 16-24 VAC or 10-30 VDC
• SMS sent to a predefined user phone number
• Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited users via the Cloud Manager application (Android and iOS)
• Programming by DIP switches and SMS
• Cloud connection for remote access and application use
• IP65 plastic box with wiring (Eco)

4G Gate Controller and Communicator

4G/LTE remote controller and communicator with 1 input and 1 relay output, supporting free-call gate opening, SMS notifications and complete cloud-based remote control – ideal for gates, garage doors, barriers and general automation tasks. The improved input logic (DIP 2) also enables door/gate status monitoring with delayed alarm functionality.

• 1 opto-isolated input (NO/NC), max. 24 VAC / 35 VDC
• Special DIP2 input logic: NO-mode notification / NC-mode door monitoring with 120 s timer and alarm
• 1 potential-free relay output (C/NO/NC), max. 230 VAC / 5 A
• Bistable or monostable relay mode (1–65.535 s)
• Free GSM call output control
• Control from pre-saved numbers or without a caller ID
• SMS notification on input change, optional voice call alarm
• Cloud remote control with 4G data connection (Cloud Manager app + web interface)
• Cloud management of unlimited number of users 
• Push and email notifications, status queries and event log
• Remote control with a single icon from a browser or a mobile application
• Simple on-site setup via 4 DIP switches and SMS commands
• Power supply: 12–24 VAC or 10–35 VDC
• 4G/LTE and GSM network support

IP/GPRS/GSM Communicator

When should you choose the IPCOM G? If there is wired internet at the site, but the 2G/3G mobile network is sufficient for the backup channel – even without 4G coverage. It is a reliable, MABISZ-certified security solution with lower mobile network costs.

• The primary signaling channel is wired Internet, providing immediate signal transmission.
• The secondary signaling channel is GPRS:
  • In backup mode: if the Ethernet connection is faulty.
  • In parallel mode: simultaneous transmission over Ethernet and GPRS.
• Furthermore, it can be used as a primary signaling channel if there is no wired Internet at the site.

The IPCOM G is a high-level security solution in a cost-effective way.

Multipurpose GSM Intercom module

• It can be combined with any four flats systems
• Two relay outputs which DTMF codes can control during a call
• Free gate opener function from 1000 phone numbers
• Power monitoring
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

GSM gate controller and communicator

• 1 input optocoupler (voltage)
• 1 relay output 230VAC / 24VDC, NO/NC
• Output control monostable (65535 sec.) or bistable
• Power supply: 16-24 VAC or 10-30 VDC
• SMS sent to a predefined user phone number
• Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited users via the Cloud Manager application (Android and iOS)
• Programming by DIP switches and SMS
• Cloud connection for remote access and application use
• IP65 plastic box with wiring (Eco)

Multipurpose 4G Intercom module

• It can be combined with any four flat systems
• Two relay outputs which DTMF codes can control during a call, (bistable, monostable mode)
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android