Alarm signalling to the monitoring station – Contact ID, SIA DC-09, Enigma
The devices available on this page allow reliable transmission of alarm system signals to monitor centres using various standard signalling protocols, such as Contact ID, SIA DC-09, and Enigma. These protocols ensure accurate and fast information transfer, are critical for security, and enable real-time monitoring and management of alarm events.
The Contact ID and SIA DC-09 protocols ensure the monitoring station receives detailed information about each event, including zones, alarm types, and other important data. The Enigma protocol offers additional security by transmitting encrypted data, preventing unauthorized access and data manipulation.
The devices also allow flexible alarm system configuration, so the signalling systems can be adapted to specific security requirements. This ensures that every alarm event immediately reaches the appropriate location while the user is fully informed about the system’s operation and status.
IPCOM Cloud - IP communicator with 2IO Cloud compatible
IP transmitter
The IPCOM Could IP communicator is a perfect solution for monitoring transmission where wired Internet is available. By means of the device immediate alarm transmission is guaranteed without any additional operation cost. The IPCOM Cloud IP communicator can be connected to the telephone line connector of the alarm control panel (or to the serial port of some specified alarm control panel). Additionally it can send the status of two inputs. After the automatic network setting configuration (DHCP) and monitoring station data entering the events are ready to be sent to two different monitoring stations.
COM G Cloud - GSM/GPRS communicator with 2IO Cloud compatible
GPRS/GSM communicator
The COM G Cloud GPRS/GSM communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM. A secondary GSM channel can be used in a backup way, in a parallel way (GSM and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM communicator means a high-security solution.
ProCon GSM Cloud - GSM transceiver and remote control with 5 inputs and 1 relay output
- 5 contact driven input
- 1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers
- 8 notified phone numbers can be set
- SMS, voice message, Contact ID sending
- Expansion possibility ( GSM alarm center)
- GPRS transmission to the monitoring station, by Enigma and SIA IP protocol
- Programming by SMS, PC, Cloud and the voice menu
IPCOM G Cloud - IP and GSM communicator with 2IO Cloud compatible
IP/GPRS/GSM communicator
The IPCOM G Cloud GPRS transmitter is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS. Secondary GPRS channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS transmission at the same time), and as the main transmission channel (if there is no Ethernet network at the installation site). IPCOM G Cloud GPRS transmitter means high security solution.
ProLine 4G Cloud - 4G line simulator with 2 inputs and 1 output, communicator with remote controlling
Analog telephone line simulator (PSTN) with output control
- Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
- Reception of Contact ID codes through line input
- Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
- Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
- Specification of 8 phone numbers for notifications via SMS and voice messages
- Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
- 2 NO/NC contact controlled inputs
- 1 relay output, which can be controlled freely from up to 1000 phone numbers
- Output can be monostable or bistable controlled
- Battery connector for ProBattery battery
- Expansion option: 1 relay and 3 relay output expanders
- Programming via SMS, PC, WIFI, Android app
ProCon 4G Cloud - 5-input, 1-relay output 4G transmitter and remote control
- 5 contact-driven input
- 1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers
- 8 notified phone numbers can be set
- SMS, voice message, Contact ID sending
- Expansion possibility
- GPRS transmission to the monitoring station by Enigma and SIA IP protocol
- Programming by SMS, PC and android application via Bluetooth and Internet
COM 4G Cloud - GSM/GPRS/4G communicator with 2IO Cloud compatible
GPRS/GSM/4G communicator
The COM 4G Cloud GPRS/GSM/4G communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM/4G. A secondary GSM/4G channel can be used in a backup way, in a parallel way (GSM/4G and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM/4G communicator means a high-security solution.
IPCOM 4G Cloud - IP and 4G communicator with 2IO Cloud compatible
IP 2G/3G/4G Communicator
The IPCOM 4G Cloud module is recommended for high-security applications where the backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS/HSPA/LTE. Secondary GPRS/HSPA/LTE channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS/HSPA/LTE transmission at the same time), and as the main transmission channel (if there is no Ethernet network at installation site). IPCOM 4G Cloud module means a high-security solution.
ProLine 4G LAN Cloud - 4G line simulator with LAN connection, 2 inputs and 1 output, communicator with remote controlling
Analog telephone line simulator (PSTN) with output control
- Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
- Reception of Contact ID codes through line input
- Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
- Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
- Specification of 8 phone numbers for notifications via SMS and voice messages
- Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
- 2 NO/NC contact controlled inputs
- 1 relay output, which can be controlled freely from up to 1000 phone numbers
- Output can be monostable or bistable controlled
- Battery connector for ProBattery battery
- Expansion option: 1 relay output expanders
- Programming via SMS, PC, WIFI, Android app