Gate, barrier, garage door control with GSM and Cloud
Control your gate, barrier, or garage door conveniently and cost-effectively from anywhere! With GSM modules, you can open it remotely with a single call or SMS, with or without caller ID recognition (up to 1000 phone numbers). Besides GSM remote control, you can also manage your devices from the Cloud Manager application.
How to choose the right module?
The inputs of GSM/4G modules are for notifications, while the outputs are for control. The number of inputs and outputs varies depending on the module type.
Upon receiving a signal (contact) on the inputs, you can get notifications (voice call and/or SMS) to the specified phone numbers. For cloud-based products, you can also set up push and email notifications.
Outputs can be controlled with or without caller ID recognition. The most popular GSM module is the MultiOne GSM Cloud module, which identifies the caller based on the phone numbers stored on the SIM card (250/500 phone numbers) when caller ID recognition is enabled. Other GSM modules control the output based on phone numbers stored in internal memory, which can be up to 1000 phone numbers. Outputs can also be controlled by SMS if you know the 4-digit security code. The number of outputs determines how many devices you can control; for example, the ProCon GSM Cloud or the faster ProCon 4G Cloud module, operating on a 4G network, can control up to 4 devices simultaneously and independently. You can specify the control mode (monostable or bistable) and the control duration (max. 65000 seconds) for each output. In gate control, the output is controlled for 2-3 seconds in monostable mode.
In the free Cloud Manager application, you can create control icons to manage your devices without a GSM call. You can also create custom icons in the application for easier identification and control of your equipment.
MultiOne GSM Cloud - 1 input and 1 relay output GSM remote controller
GSM gate controller and communicator
- 1 input optocoupler (voltage)
- 1 relay output 230VAC / 24VDC, NO/NC
- Output control monostable (65535 sec.) or bistable
- Power supply: 16-24 VAC or 10-30 VDC
- SMS sent to a predefined user phone number
- Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited user via Cloud Manager application (Android and iOS)
- Programming by DIP switches and SMS
- Cloud connection for remote access and application use
COM G Cloud - GSM/GPRS communicator with 2IO Cloud compatible
GPRS/GSM communicator
The COM G Cloud GPRS/GSM communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM. A secondary GSM channel can be used in a backup way, in a parallel way (GSM and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM communicator means a high-security solution.
EasyCon GSM - 2 inputs and 1 OC output
Ultra compact GSM communicator just 61x31mm
- Miniature GSM communicator(6 x 3 cm)
- 2 contact driven output
- 1 Open Collector output
- It can be controlled either by SMS from unlimited phone numbers, or by voice call from 1000 phone numbers
- Forwarding SMS and voice message to 8 users
- Transmission to the monitoring station via GPRS
- Programming by SMS, PC, Android or by Voice menu
MultiOne GSM Cloud Kit Eco - 1 input and 1 relay output GSM remote controller in IP box
GSM gate controller and communicator
- 1 input optocoupler (voltage)
- 1 relay output 230VAC / 24VDC, NO/NC
- Output control monostable (65535 sec.) or bistable
- Power supply: 16-24 VAC or 10-30 VDC
- SMS sent to a predefined user phone number
- Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited users via the Cloud Manager application (Android and iOS)
- Programming by DIP switches and SMS
- Cloud connection for remote access and application use
- IP65 plastic box with wiring (Eco)
ProCon GSM Cloud - GSM transceiver and remote control with 5 inputs and 1 relay output
- 5 contact driven input
- 1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers
- 8 notified phone numbers can be set
- SMS, voice message, Contact ID sending
- Expansion possibility ( GSM alarm center)
- GPRS transmission to the monitoring station, by Enigma and SIA IP protocol
- Programming by SMS, PC, Cloud and the voice menu
IPCOM G Cloud - IP and GSM communicator with 2IO Cloud compatible
IP/GPRS/GSM communicator
The IPCOM G Cloud GPRS transmitter is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS. Secondary GPRS channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS transmission at the same time), and as the main transmission channel (if there is no Ethernet network at the installation site). IPCOM G Cloud GPRS transmitter means high security solution.
InterCom GSM - GSM call forwarding device (intercom / lifts)
Multipurpose GSM Intercom module
- It can be combined with any four flats systems
- Two relay outputs which DTMF codes can control during a call
- Free gate opener function from 1000 phone numbers
- Power monitoring
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and Android
ProCon 4G Cloud - 5-input, 1-relay output 4G transmitter and remote control
- 5 contact-driven input
- 1 NO/ NC relay output which can be controlled either by SMS from unlimited phone numbers or by voice call from 1000 phone numbers
- 8 notified phone numbers can be set
- SMS, voice message, Contact ID sending
- Expansion possibility
- GPRS transmission to the monitoring station by Enigma and SIA IP protocol
- Programming by SMS, PC and android application via Bluetooth and Internet
InterCom 4G - 4G call forwarding device (intercom / lifts)
Multipurpose 4G Intercom module
- It can be combined with any four flat systems
- Two relay outputs which DTMF codes can control during a call, (bistable, monostable mode)
- Free gate opener function from 1000 phone numbers
- Power monitoring, optional ProBattery for uninterrupted operation
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and Android
COM 4G Cloud - GSM/GPRS/4G communicator with 2IO Cloud compatible
GPRS/GSM/4G communicator
The COM 4G Cloud GPRS/GSM/4G communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM/4G. A secondary GSM/4G channel can be used in a backup way, in a parallel way (GSM/4G and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM/4G communicator means a high-security solution.
IPCOM 4G Cloud - IP and 4G communicator with 2IO Cloud compatible
IP 2G/3G/4G Communicator
The IPCOM 4G Cloud module is recommended for high-security applications where the backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS/HSPA/LTE. Secondary GPRS/HSPA/LTE channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS/HSPA/LTE transmission at the same time), and as the main transmission channel (if there is no Ethernet network at installation site). IPCOM 4G Cloud module means a high-security solution.
InterCom GSM Monitoring Set - GSM module for voice calls, with speaker and microphone
Universal GSM Caller with Speaker and Microphone
This device can be installed behind an existing or custom front panel and operates as a voice-based universal GSM caller.
- 5 inputs capable of receiving trigger signals
- Ability to assign 8 notifying phone numbers to the inputs
- Voice communication is established with the called number through the speaker and microphone
- 2 relay outputs, controllable during calls with DTMF codes or remotely via call or SMS
- Outputs can be configured as either bistable or monostable
- Free gate opening function for 1000 phone numbers with caller ID and unlimited numbers without ID
- Remote monitoring with SIA DC-09 protocol: sending inputs status, life signals, and proprietary signals
- Network power supply monitoring with notification sending and uninterruptible operation with optional ProBattery
- 16,000 event memory and continuous GSM signal strength monitoring
- Night mode, where only the output can be controlled
- SMS, PC, and Android programming capabilities