You can control your GSM Module via GPRS (GPRS Remote)

19/05/2017 12:00:00 AM

The usage of the GSM modules have became widespread thanks to the changing of the demands. Previously the GSM communicators were used for signal transmission along with notification sending. Nowadays, it is widely used for remote control and querying the devices’s status.

The remote control of the GSM devices can be accomplished easily by free call as well as handling the permissions. Most of our modules can be managed with 1000 phone number.

Depending on the needs, we have the possibility to create groups to which we can assign time frames. We can create three groups. Within these groups the members can activate the outputs as per the particular time period what is set.

Időkeretet adhatunk meg

 

GSM based remote control

When we wanted to use two or more outputs before, we could do it by direct DMTF control. This function allowed us to use our mobile phone as a remote controller. The 1st, 2nd, 3rd and 4th buttons of the mobile device makes possible the output control during voice call. We can activate the outputs in this way until we are on the line.

 

GPRSRemote - GPRS based remote control via application

 

Due to the GPRS application:

  • We can query the actual state of the GSM module (Inputs/Outputs/Arming)

  • We can control the outputs remotely

  • If we use the GSM modul as a standalone alarm centre, we can arm and disarm

 

For using the application it is enough to give the necessary data. Afterwards, the software sends a configuration SMS to the GSM module, which includes the server settings. Then, in 1 minute the pairing process will be done, and we can use the program.

Multiple GSM modules and smarthones can be added to the GPRS Remote. It allows us to control more GSM devices with one application. Moreover, we can achieve one module by more mobile devices.

 

In the application we have the posibility to handle permissions. The master user possesses overall access. It can modify the settings for instance deleting users, generating sharing code.

 

By using sharing code, additional smartphones can be added to the application simply. We can generate the sharing code by a GSM module which is already registrated. After that, on the new smartphone it is sufficient to give this code which is valid for one day.

 

The user can name the GSM module which will be paired. Therefore, if we use more communicators, this function will promote to make distinction among the devices.

We need to launch the application to manage the outputs. After the automatic connection, we can log in into the control

 

The GPRS Remote application is free and it does not contain any ads!

 

The GPRS Remote application can be downloaded from the play store:

GPRSRemote application

The manual of the GPRS Remote application can be downloaded from here:

GPRSRemote manual

Expansion modules

If we need more than one relay output, we can expand the GSM communicator with one or three relays. The relay expansion module can be connected to the ProCon GSM and to the ProLine GSM modules.