Remote control of devices with LAN connection
If the device you want to control remotely has a LAN connection (RJ45), you can control it with an IP module. The I/O connection points of IP devices can be configured as inputs or outputs depending on your needs. When an input signal is received, notifications can be sent about the change in input status, while as an output, it can be used for remote control. They operate through an Ethernet network, so there is no need for a GSM network or WIFI connection.
Using I/O connection points as outputs:
- 2 OpenCollector outputs, which can be used as relay contact controlled outputs with OC relays
- the two outputs can be controlled separately with the Cloud Manager application
- output control mode: monostable max. 65535 seconds, configurable per output
- user access management per output on ascloudmanager.com
- controllable from a computer via URL (e.g., reception or security desk)
- unlimited number of users can be added for control
- email and push notifications can be received about output status changes
The modules' 2 freely configurable I/O connection ports can be expanded with up to 2 IO84 modules, providing an additional 16 inputs and 8 outputs. Push and/or email notifications can be received about the input and output status changes of the expansion panel.
IPCOM Cloud - IP communicator with 2IO Cloud compatible
IP transmitter
The IPCOM Could IP communicator is a perfect solution for monitoring transmission where wired Internet is available. By means of the device immediate alarm transmission is guaranteed without any additional operation cost. The IPCOM Cloud IP communicator can be connected to the telephone line connector of the alarm control panel (or to the serial port of some specified alarm control panel). Additionally it can send the status of two inputs. After the automatic network setting configuration (DHCP) and monitoring station data entering the events are ready to be sent to two different monitoring stations.
IPCOM G Cloud - IP and GSM communicator with 2IO Cloud compatible
IP/GPRS/GSM communicator
The IPCOM G Cloud GPRS transmitter is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS. Secondary GPRS channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS transmission at the same time), and as the main transmission channel (if there is no Ethernet network at the installation site). IPCOM G Cloud GPRS transmitter means high security solution.
IPCOM 4G Cloud - IP and 4G communicator with 2IO Cloud compatible
IP 2G/3G/4G Communicator
The IPCOM 4G Cloud module is recommended for high-security applications where the backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS/HSPA/LTE. Secondary GPRS/HSPA/LTE channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS/HSPA/LTE transmission at the same time), and as the main transmission channel (if there is no Ethernet network at installation site). IPCOM 4G Cloud module means a high-security solution.
Searching for in-stock products
Product filter
Featured Areas
