GSM/GPRS/4G transmitters, remote controls

GSM gate controller and communicator

• 1 input optocoupler (voltage)
• 1 relay output 230VAC / 24VDC, NO/NC
• Output control monostable (65535 sec.) or bistable
• Power supply: 16-24 VAC or 10-30 VDC
• SMS sent to a predefined user phone number
• Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited user via Cloud Manager application (Android and iOS)
• Programming by DIP switches and SMS
• Cloud connection for remote access and application use

GPRS/GSM communicator

The COM G Cloud GPRS/GSM communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM. A secondary GSM channel can be used in a backup way, in a parallel way (GSM and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM communicator means a high-security solution.

Ultra compact GSM communicator just 61x31mm

• Miniature GSM communicator(6 x 3 cm)
• 2 contact driven output
• 1 Open Collector output
• It can be controlled either by SMS from unlimited phone numbers, or by voice call from 1000 phone numbers
• Forwarding SMS and voice message to 8 users
• Transmission to the monitoring station via GPRS
• Programming by SMS, PC, Android or by Voice menu

GSM gate controller and communicator

• 1 input optocoupler (voltage)
• 1 relay output 230VAC / 24VDC, NO/NC
• Output control monostable (65535 sec.) or bistable
• Power supply: 16-24 VAC or 10-30 VDC
• SMS sent to a predefined user phone number
• Output control by phone numbers that are saved on the SIM card (250/500), or controlled without caller ID (unlimited) or unlimited users via the Cloud Manager application (Android and iOS)
• Programming by DIP switches and SMS
• Cloud connection for remote access and application use
• IP65 plastic box with wiring (Eco)

Miniature phone (PSTN) simulator (6 x 4 cm)

EasyLine GSM provides a full (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call center or elevator call.

• TIP/RING connection to PSTN line simulation
• 1 SMS contact input
• 1 OC output
• SMS forwarding
• Contact ID, 4/2 protocol
• Programming by SMS or phone (DTMF)
• Output control by saved numbers on the SIM card

Miniature phone (PSTN) simulator (6 x 4 cm)

The EasyLine 4G Cloud provides a fully featured (48 V) connection to the alarm centre via a TIP/RING line. Through this connection, the alarm centre can notify the remote monitoring receiver with a voice call or send an alarm centre voice message to the end user. In addition to traditional phone calls, communication with remote monitoring can now be achieved via GPRS/LTE channels using digital (IP-based) protocols. This enables more stable and modern data transmission in SIA-IP and Enigma formats. Thanks to the OC output, the stored phone numbers can be used to control the output, which can be used to arm or disable the alarm centre. It is suitable for replacing landline telephone lines in telephone exchanges or for use in lift call systems. It sends a notification in the event of an input signal.

• It features a TIP/RING connection for simulating a PSTN line.
• Contact ID and 4/2 protocol transmission from the alarm control panel.
• It enables two-way voice communication.
• It also supports GPRS/LTE data transmission and the SIA-IP and Enigma protocols.
• Flexible customer ID management without central modification.
• 'GPRS only' mode – exclusion of the alarm control panel notification route
• One NO/NC contact input.
• SMS and voice message transmission to eight phone numbers in the event of an input signal.
• One OC output with bistable and monostable control
• Output control with 1000 phone numbers
• PC programming via USB or Bluetooth with firmware update
• Cloud-based configuration and remote control via a mobile app.

Multipurpose GSM Intercom module

• It can be combined with any four flats systems
• Two relay outputs which DTMF codes can control during a call
• Free gate opener function from 1000 phone numbers
• Power monitoring
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

Analog telephone line simulator (PSTN) with output control

• Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
• Reception of Contact ID codes through line input
• Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
• Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
• Specification of 8 phone numbers for notifications via SMS and voice messages
• Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
• 2 NO/NC contact controlled inputs
• 1 relay output, which can be controlled freely from up to 1000 phone numbers
• Output can be monostable or bistable controlled
• Battery connector for ProBattery battery
• Expansion option: 1 relay and 3 relay output expanders
• Programming via SMS, PC, WIFI, Android app​

Multipurpose 4G Intercom module

• It can be combined with any four flat systems
• Two relay outputs which DTMF codes can control during a call, (bistable, monostable mode)
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

GPRS/GSM/4G communicator

The COM 4G Cloud GPRS/GSM/4G communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM/4G. A secondary GSM/4G channel can be used in a backup way, in a parallel way (GSM/4G and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM/4G communicator means a high-security solution.