Elevator monitoring and emergency call systems – GSM/4G line replacement solutions

Miniature phone (PSTN) simulator (6 x 4 cm)

EasyLine GSM provides a full (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call center or elevator call.

• TIP/RING connection to PSTN line simulation
• 1 SMS contact input
• 1 OC output
• SMS forwarding
• Contact ID, 4/2 protocol
• Programming by SMS or phone (DTMF)
• Output control by saved numbers on the SIM card

Miniature phone (PSTN) simulator (6 x 4 cm)

The EasyLine 4G Cloud provides a fully featured (48 V) connection to the alarm centre via a TIP/RING line. Through this connection, the alarm centre can notify the remote monitoring receiver with a voice call or send an alarm centre voice message to the end user. In addition to traditional phone calls, communication with remote monitoring can now be achieved via GPRS/LTE channels using digital (IP-based) protocols. This enables more stable and modern data transmission in SIA-IP and Enigma formats. Thanks to the OC output, the stored phone numbers can be used to control the output, which can be used to arm or disable the alarm centre. It is suitable for replacing landline telephone lines in telephone exchanges or for use in lift call systems. It sends a notification in the event of an input signal.

• It features a TIP/RING connection for simulating a PSTN line.
• Contact ID and 4/2 protocol transmission from the alarm control panel.
• It enables two-way voice communication.
• It also supports GPRS/LTE data transmission and the SIA-IP and Enigma protocols.
• Flexible customer ID management without central modification.
• 'GPRS only' mode – exclusion of the alarm control panel notification route
• One NO/NC contact input.
• SMS and voice message transmission to eight phone numbers in the event of an input signal.
• One OC output with bistable and monostable control
• Output control with 1000 phone numbers
• PC programming via USB or Bluetooth with firmware update
• Cloud-based configuration and remote control via a mobile app.

Analog telephone line simulator (PSTN) with output control

• Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
• Reception of Contact ID codes through line input
• Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
• Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
• Specification of 8 phone numbers for notifications via SMS and voice messages
• Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
• 2 NO/NC contact controlled inputs
• 1 relay output, which can be controlled freely from up to 1000 phone numbers
• Output can be monostable or bistable controlled
• Battery connector for ProBattery battery
• Expansion option: 1 relay and 3 relay output expanders
• Programming via SMS, PC, WIFI, Android app​

Analog telephone line simulator (PSTN) with output control

• Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
• Reception of Contact ID codes through line input
• Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
• Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
• Specification of 8 phone numbers for notifications via SMS and voice messages
• Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
• 2 NO/NC contact controlled inputs
• 1 relay output, which can be controlled freely from up to 1000 phone numbers
• Output can be monostable or bistable controlled
• Battery connector for ProBattery battery
• Expansion option: 1 relay output expanders
• Programming via SMS, PC, WIFI, Android app​