GSM elevator monitoring, elevator call, and emergency call systems
The GSM elevator monitoring, elevator call, and emergency call devices featured on our website offer secure and reliable elevator supervision and communication solutions.
These products are essential in environments where quick communication is necessary between elevator users and the monitoring centre. They support various communication methods such as voice calls, SMS messages, GPRS/4G transmission, or life signal transmission to monitoring centres or reception desks.
GSM elevator monitoring systems ensure that users can quickly contact assistance (monitoring centre, emergency services) with a button.
These devices may also include additional safety features, such as signals from external sensors or motion detectors, enabling security personnel to be alerted during accidents or malfunctions. They are usually installed in easily accessible, visible locations inside the elevator, allowing for one-touch activation.
There are two different types of products to choose from: the line simulator, which can replace the PSTN line, and the InterCom GSM/4G module, which is equipped with a speaker and microphone. The InterCom GSM/4G has different looks and several buttons. Thanks to ProBattery, ProLine 4G and InterCom GSM/4G can be uninterrupted in the event of a power failure and will also send a notification.
EasyLine GSM - 48/72 V line simulator with 1 input and 1 output
Miniature phone (PSTN) simulator (6 x 4 cm)
EasyLine GSM provides a full (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call center or elevator call.
- TIP/RING connection to PSTN line simulation
- 1 SMS contact input
- 1 OC output
- SMS forwarding
- Contact ID, 4/2 protocol
- Programming by SMS or phone (DTMF)
- Output control by saved numbers on the SIM card
EasyLine 4G - 48/72 V 4G line simulator with 1 input and 1 output
Miniature phone (PSTN) simulator (6 x 4 cm)
EasyLine GSM provides a complete (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Furthermore, thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call centre or elevator call.
- TIP/RING connection for PSTN line simulation
- Transmission of Contact ID, 4/2 protocol from the alarm centre
- Two-way voice communication
- 1 NO/NC contact input
- SMS, voice message transmission to 8 phone numbers in case of an input signal
- 1 OC output, bistable, monostable control
- Output control with 1000 phone numbers
- PC programming with the firmware update
InterCom GSM - GSM call forwarding device (intercom / lifts)
Multipurpose GSM Intercom module
- It can be combined with any four flats systems
- Two relay outputs which DTMF codes can control during a call
- Free gate opener function from 1000 phone numbers
- Power monitoring
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and Android
ProLine 4G Cloud - 4G line simulator with 2 inputs and 1 output, communicator with remote controlling
Analog telephone line simulator (PSTN) with output control
- Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
- Reception of Contact ID codes through line input
- Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
- Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
- Specification of 8 phone numbers for notifications via SMS and voice messages
- Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
- 2 NO/NC contact controlled inputs
- 1 relay output, which can be controlled freely from up to 1000 phone numbers
- Output can be monostable or bistable controlled
- Battery connector for ProBattery battery
- Expansion option: 1 relay and 3 relay output expanders
- Programming via SMS, PC, WIFI, Android app
InterCom 4G - 4G call forwarding device (intercom / lifts)
Multipurpose 4G Intercom module
- It can be combined with any four flat systems
- Two relay outputs which DTMF codes can control during a call, (bistable, monostable mode)
- Free gate opener function from 1000 phone numbers
- Power monitoring, optional ProBattery for uninterrupted operation
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and Android
ProLine 4G LAN Cloud - 4G line simulator with LAN connection, 2 inputs and 1 output, communicator with remote controlling
Analog telephone line simulator (PSTN) with output control
- Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
- Reception of Contact ID codes through line input
- Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
- Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
- Specification of 8 phone numbers for notifications via SMS and voice messages
- Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
- 2 NO/NC contact controlled inputs
- 1 relay output, which can be controlled freely from up to 1000 phone numbers
- Output can be monostable or bistable controlled
- Battery connector for ProBattery battery
- Expansion option: 1 relay output expanders
- Programming via SMS, PC, WIFI, Android app
InterCom GSM Monitoring Set - GSM module for voice calls, with speaker and microphone
Universal GSM Caller with Speaker and Microphone
This device can be installed behind an existing or custom front panel and operates as a voice-based universal GSM caller.
- 5 inputs capable of receiving trigger signals
- Ability to assign 8 notifying phone numbers to the inputs
- Voice communication is established with the called number through the speaker and microphone
- 2 relay outputs, controllable during calls with DTMF codes or remotely via call or SMS
- Outputs can be configured as either bistable or monostable
- Free gate opening function for 1000 phone numbers with caller ID and unlimited numbers without ID
- Remote monitoring with SIA DC-09 protocol: sending inputs status, life signals, and proprietary signals
- Network power supply monitoring with notification sending and uninterruptible operation with optional ProBattery
- 16,000 event memory and continuous GSM signal strength monitoring
- Night mode, where only the output can be controlled
- SMS, PC, and Android programming capabilities
InterCom GSM Kit 1 flat - GSM call forwarding device (intercom / lifts)
GSM intercom module, 1 apartment version
- 1 apartment intercom with metal push button, microphone, speaker
- 2 relay output which can be controlled by DTMF codes during call
- Free gate opener function from 1000 phone numbers
- Power monitoring, optional ProBattery for uninterrupted operation
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and android
InterCom 4G Monitoring Set - GSM/4G module for voice calls, with speaker and microphone
Universal GSM/4G Caller with Speaker and Microphone
This device can be installed behind an existing or custom front panel and operates as a voice-based universal GSM/4G caller.
- 5 inputs capable of receiving trigger signals
- Ability to assign 8 notifying phone numbers to the inputs
- Voice communication is established with the called number through the speaker and microphone
- 2 relay outputs, controllable during calls with DTMF codes or remotely via call or SMS
- Outputs can be configured as either bistable or monostable
- Free gate opening function for 1000 phone numbers with caller ID and unlimited numbers without ID
- Remote monitoring with SIA DC-09 protocol: sending inputs status, life signals, and proprietary signals
- Network power supply monitoring with notification sending and uninterruptible operation with optional ProBattery
- 16,000 event memory and continuous GSM signal strength monitoring
- Night mode, where only the output can be controlled
- SMS, PC, and Android programming capabilities
InterCom GSM Kit Forest - GSM caller, with GPRS, SMS and voice calls
GSM intercom module, green version
- InterCom GSM with metal push button, microphone, speaker
- 2 relay output which DTMF codes can control during call
- Free gate opener function from 1000 phone numbers
- Power monitoring, optional ProBattery for uninterrupted operation
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- LED lighting
- Programming by SMS, PC and Android
InterCom GSM Kit 2 flats - GSM call forwarding device (intercom / lifts)
GSM intercom module, 2 apartments version
- 2 apartments intercom with metal push buttons, microphone, speaker
- 2 relay output which can be controlled by DTMF codes during a call
- Free gate opener function from 1000 phone numbers
- Power monitoring, optional ProBattery for uninterrupted operation
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and Android
InterCom GSM Kit Emergency - GSM emergency call, with GPRS, SMS and voice calls
GSM intercom module, emergency version
- Intercom GSM with metal push button, microphone, speaker
- With customizable inscription (fire, help, etc.)
- 2 relay output which can be controlled by DTMF codes during call
- Free gate opener function from 1000 phone numbers
- Power monitoring, optional ProBattery for uninterrupted operation
- Event log of 16.000 entries, continuous GSM signal strength monitoring
- Night shift mode: a time interval can be set when the module will not forward incoming calls
- Programming by SMS, PC and android