Application areas

IP/GPRS/GSM communicator

The IPCOM G Cloud GPRS transmitter is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS. Secondary GPRS channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS transmission at the same time), and as the main transmission channel (if there is no Ethernet network at the installation site). IPCOM G Cloud GPRS transmitter means high security solution.

Miniature phone (PSTN) simulator (6 x 4 cm)

The EasyLine 4G Cloud provides a fully featured (48 V) connection to the alarm centre via a TIP/RING line. Through this connection, the alarm centre can notify the remote monitoring receiver with a voice call or send an alarm centre voice message to the end user. In addition to traditional phone calls, communication with remote monitoring can now be achieved via GPRS/LTE channels using digital (IP-based) protocols. This enables more stable and modern data transmission in SIA-IP and Enigma formats. Thanks to the OC output, the stored phone numbers can be used to control the output, which can be used to arm or disable the alarm centre. It is suitable for replacing landline telephone lines in telephone exchanges or for use in lift call systems. It sends a notification in the event of an input signal.

• It features a TIP/RING connection for simulating a PSTN line.
• Contact ID and 4/2 protocol transmission from the alarm control panel.
• It enables two-way voice communication.
• It also supports GPRS/LTE data transmission and the SIA-IP and Enigma protocols.
• Flexible customer ID management without central modification.
• 'GPRS only' mode – exclusion of the alarm control panel notification route
• One NO/NC contact input.
• SMS and voice message transmission to eight phone numbers in the event of an input signal.
• One OC output with bistable and monostable control
• Output control with 1000 phone numbers
• PC programming via USB or Bluetooth with firmware update
• Cloud-based configuration and remote control via a mobile app.

GSM/IP Communicator with EN 54-21 certification

The ENICOM 2G communicator is recommended where backup signal transmission and EN54-21 certification are required. The GSM module is an ideal solution for signal transmission of fire alarm centres via the GSM/GPRS/LTE/IP channel.

• 4 doubling inputs (8 inputs): NO/NC /EOL/ 2 EOL/ zone doubling
• 2 OC outputs NO/NC/Follower (input, output, event)
• PSTN line simulation to receive the Contac ID events
• Expansion option with the EC-84 expander: 8 inputs, 4 outputs/expander, max. 8 pcs EC-84 expanders
• Forwarding to 4 remote monitoring servers, with multiple route options
• 256 event log with time stamp
• 2G connection, Dual SIM nano (2 SIM cards)
• Ethernet connection
• Cloud connection
• SIA DC-09 protocol
• EN 54-21 certification

Multipurpose GSM Intercom module

• It can be combined with any four flats systems
• Two relay outputs which DTMF codes can control during a call
• Free gate opener function from 1000 phone numbers
• Power monitoring
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

Analog telephone line simulator (PSTN) with output control

• Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
• Reception of Contact ID codes through line input
• Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
• Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
• Specification of 8 phone numbers for notifications via SMS and voice messages
• Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
• 2 NO/NC contact controlled inputs
• 1 relay output, which can be controlled freely from up to 1000 phone numbers
• Output can be monostable or bistable controlled
• Battery connector for ProBattery battery
• Expansion option: 1 relay and 3 relay output expanders
• Programming via SMS, PC, WIFI, Android app​

Multipurpose 4G Intercom module

• It can be combined with any four flat systems
• Two relay outputs which DTMF codes can control during a call, (bistable, monostable mode)
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

GPRS/GSM/4G communicator

The COM 4G Cloud GPRS/GSM/4G communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM/4G. A secondary GSM/4G channel can be used in a backup way, in a parallel way (GSM/4G and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM/4G communicator means a high-security solution.

GSM/4G/IP Communicator with EN 54-21 certification

The ENICOM 4G communicator is recommended where backup signal transmission and EN54-21 certification are required. The GSM module is an ideal solution for signal transmission of fire alarm centres via the GSM/GPRS/LTE/IP channel.

• 4 doubling inputs (8 inputs): NO/NC /EOL/ 2 EOL/ zone doubling
• 2 OC outputs NO/NC/Follower (input, output, event)
• PSTN line simulation to receive the Contac ID events
• Expansion option with the EC-84 expander: 8 inputs, 4 outputs/expander, max. 8 pcs EC-84 expanders
• Forwarding to 4 remote monitoring servers, with multiple route options
• 256 event log with time stamp
• 2G/4G connection, Dual SIM nano (2 SIM cards)
• Ethernet connection
• Cloud connection
• SIA DC-09 protocol
• EN 54-21 certification

IP 2G/3G/4G Communicator

The IPCOM 4G Cloud module is recommended for high-security applications where the backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS/HSPA/LTE. Secondary GPRS/HSPA/LTE channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS/HSPA/LTE transmission at the same time), and as the main transmission channel (if there is no Ethernet network at installation site). IPCOM 4G Cloud module means a high-security solution.

SOLAR FIBER optical fiber solar cell protection system

It was developed to protect solar panels, thanks to which we can receive a notification (loop break) 24 hours a day. The optical fiber is connected directly to the controller, which detects the cutting of the fiber. The optical fiber must be physically cut for an alarm; weather conditions (such as wind, rain or snow) will not trigger a false alarm. The plastic-insulated optical fiber is not affected by any electromagnetic noise. The maximum length of a fiber is 300m, but the distance can be increased by connecting several centres of the same type.
The theft alarm system consists of 3 parts:

• The centre sends a light signal and checks its reception, generates an alarm if the cable breaks
• The plastic fiber optic cable (with UV filters, can be installed in direct sunlight) that transmits the light signal
• Additional elements that fasten the optical fiber to the solar cells (threaded screws, fasteners)

Connectors:

• Optical output (RX)
• Optical output (TX)
• Alarm output (relay)
• Tamper switch