Products

IP/GPRS/GSM communicator

The IPCOM G Cloud GPRS transmitter is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is the wired Internet, which provides immediate alarm transmission and action without additional operating costs. The secondary reporting channel is GPRS. Secondary GPRS channel can be used in a backup way (if the Ethernet network fails), in a parallel way (Ethernet and GPRS transmission at the same time), and as the main transmission channel (if there is no Ethernet network at the installation site). IPCOM G Cloud GPRS transmitter means high security solution.

ZOLEO Universal Mount Kit, with metal holder

Ideal for securing the ZOLEO satellite communicator on the windshield of a vehicle or vessel, the ZOLEO Universal Mount Kit secures the ZOLEO device in place and keeps it charged. This kit includes the a USB car charger, RAM^® Twist-Lock™ Suction Cup Mount for a strong hold on glass and non-porous plastic surfaces, and an adjustable arm. It also includes the complete ZOLEO Cradle Kit.

Includes:

• USB car charger, for use with any 12-24 V power source
• A RAM^® Twist-Lock™ Suction Cup Mount with 1/4"-20 UNC threaded camera adapter, with metal holder
• Double socket arm (adjustable to the desired look-angle)
• Micro-USB cable, 1.2 m ( 3.9 ft)
• ZOLEO Cradle Kit
• Quick Start Guide

Miniature phone (PSTN) simulator (6 x 4 cm)

EasyLine GSM provides a complete (48V) line to the control panel via the TIP / RING connection, through which the control panel can signal the monitoring station to the receiver via a voice call or even send the control panel voice message to the end-user. Furthermore, thanks to the OC output, we can control the output with the phone numbers saved on the SIM card, with which we can arm or even disarm the control panel. Suitable for replacing a landline telephone line, also at a call centre or elevator call.

• TIP/RING connection for PSTN line simulation
• Transmission of Contact ID, 4/2 protocol from the alarm centre
• Two-way voice communication
• 1 NO/NC contact input
• SMS, voice message transmission to 8 phone numbers in case of an input signal
• 1 OC output, bistable, monostable control
• Output control with 1000 phone numbers
• PC programming with the firmware update

GSM/IP Communicator with EN 54-21 certification

The ENICOM 2G communicator is recommended where backup signal transmission and EN54-21 certification are required. The GSM module is an ideal solution for signal transmission of fire alarm centres via the GSM/GPRS/LTE/IP channel.

• 4 doubling inputs (8 inputs): NO/NC /EOL/ 2 EOL/ zone doubling
• 2 OC outputs NO/NC/Follower (input, output, event)
• PSTN line simulation to receive the Contac ID events
• Expansion option with the EC-84 expander: 8 inputs, 4 outputs/expander, max. 8 pcs EC-84 expanders
• Forwarding to 4 remote monitoring servers, with multiple route options
• 256 event log with time stamp
• 2G connection, Dual SIM nano (2 SIM cards)
• Ethernet connection
• Cloud connection
• SIA DC-09 protocol
• EN 54-21 certification

Multipurpose GSM Intercom module

• It can be combined with any four flats systems
• Two relay outputs which DTMF codes can control during a call
• Free gate opener function from 1000 phone numbers
• Power monitoring
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

Analog telephone line simulator (PSTN) with output control

• Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
• Reception of Contact ID codes through line input
• Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
• Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
• Specification of 8 phone numbers for notifications via SMS and voice messages
• Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
• 2 NO/NC contact controlled inputs
• 1 relay output, which can be controlled freely from up to 1000 phone numbers
• Output can be monostable or bistable controlled
• Battery connector for ProBattery battery
• Expansion option: 1 relay and 3 relay output expanders
• Programming via SMS, PC, WIFI, Android app​

Alarm Commander central monitoring system 

Alarm Commander is central monitoring software that can process messages received by various digital receivers and assist the operator in taking any action based on previously recorded data. It minimizes the task for the operator based on pre-set parameters and facilitates quick and efficient action thanks to its transparent, simple interface and handling.

We can expand our Alarm Commander Lite program from 100 objects to 250 objects, thus raising it to Base level.

Alarm Commander central monitoring system 

Alarm Commander is central monitoring software that can process messages received by various digital receivers and assist the operator in taking any action based on previously recorded data. It minimizes the task for the operator based on pre-set parameters and facilitates quick and efficient action thanks to its transparent, simple interface and handling.

Alarm Commander Base upgrade with 250 objects.

Multipurpose 4G Intercom module

• It can be combined with any four flat systems
• Two relay outputs which DTMF codes can control during a call, (bistable, monostable mode)
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

GPRS/GSM/4G communicator

The COM 4G Cloud GPRS/GSM/4G communicator is recommended for high-security applications where a backup transmission line is essential. The main reporting channel is GPRS, which provides immediate alarm transmission and action. The secondary reporting channel is GSM/4G. A secondary GSM/4G channel can be used in a backup way, in a parallel way (GSM/4G and GPRS transmission at the same time), and as the main transmission channel. COM G Cloud GPRS/GSM/4G communicator means a high-security solution.

GSM/4G/IP Communicator with EN 54-21 certification

The ENICOM 4G communicator is recommended where backup signal transmission and EN54-21 certification are required. The GSM module is an ideal solution for signal transmission of fire alarm centres via the GSM/GPRS/LTE/IP channel.

• 4 doubling inputs (8 inputs): NO/NC /EOL/ 2 EOL/ zone doubling
• 2 OC outputs NO/NC/Follower (input, output, event)
• PSTN line simulation to receive the Contac ID events
• Expansion option with the EC-84 expander: 8 inputs, 4 outputs/expander, max. 8 pcs EC-84 expanders
• Forwarding to 4 remote monitoring servers, with multiple route options
• 256 event log with time stamp
• 2G/4G connection, Dual SIM nano (2 SIM cards)
• Ethernet connection
• Cloud connection
• SIA DC-09 protocol
• EN 54-21 certification