Products

Solo2 Bluetooth remote control

SOLO allows you to remotely control radio-controlled devices with your smartphone. 10 users, access sharing, battery power, no installation / wired connection required.

• Opportunity to open 4 gates, garage, barrier
• It manages 10 users
• Battery operated, no installation required
• Authorization management, sharing function

Recommended for: family houses, small offices, shops.

SOLAR FIBER optical fiber solar cell protection system

It was developed to protect solar panels, thanks to which we can receive a notification (loop break) 24 hours a day. The optical fiber is connected directly to the controller, which detects the cutting of the fiber. The optical fiber must be physically cut for an alarm; weather conditions (such as wind, rain or snow) will not trigger a false alarm. The plastic-insulated optical fiber is not affected by any electromagnetic noise. The maximum length of a fiber is 300m, but the distance can be increased by connecting several centres of the same type.
The theft alarm system consists of 3 parts:

• The centre sends a light signal and checks its reception, generates an alarm if the cable breaks
• The plastic fiber optic cable (with UV filters, can be installed in direct sunlight) that transmits the light signal
• Additional elements that fasten the optical fiber to the solar cells (threaded screws, fasteners)

Connectors:

• Optical output (RX)
• Optical output (TX)
• Alarm output (relay)
• Tamper switch

Analog telephone line simulator (PSTN) with output control

• Analog telephone line (PSTN) simulator with 48V line and 72V ringing voltage
• Reception of Contact ID codes through line input
• Transmission of Contact ID codes to remote monitoring using SIA DC-09 and Enigma protocols (GPRS/LTE)
• Conversion of Contact ID to SMS, pairing of 250 events and 250 zones
• Specification of 8 phone numbers for notifications via SMS and voice messages
• Specification of 2 phone numbers and 4 IP addresses for monitoring station notification
• 2 NO/NC contact controlled inputs
• 1 relay output, which can be controlled freely from up to 1000 phone numbers
• Output can be monostable or bistable controlled
• Battery connector for ProBattery battery
• Expansion option: 1 relay output expanders
• Programming via SMS, PC, WIFI, Android app​

ZOLEO Global Satellite Communicator

• Iridium Connected™ for messaging coverage everywhere on Earth
• Dedicated SMS number and email address (sharable, recognizable)
• SOS alerting button with 24/7 monitoring and dispatch included*
• Check-in button to let others know you’re OK*
• Includes 24/7 access to non-emergency medical advice via Medical Assist
• Free app for phones/tablets supports: Two-way messaging, Two-way SOS alerting, check in, weather forecasts, location sharing and more (the app also transmits via mobile network and Wi-Fi when available)
• 200 hours of battery life, checking messages every 12 min.
• Shock-resistant, dust- and water-resistant (IP68, MIL-STD 810G)
• Subscription required (sold separately, visit ZOLEO Plans)
• 2-Year Manufacturer’s Warranty

Universal GSM Caller with Speaker and Microphone

This device can be installed behind an existing or custom front panel and operates as a voice-based universal GSM caller.

• 5 inputs capable of receiving trigger signals
• Ability to assign 8 notifying phone numbers to the inputs
• Voice communication is established with the called number through the speaker and microphone
• 2 relay outputs, controllable during calls with DTMF codes or remotely via call or SMS
• Outputs can be configured as either bistable or monostable
• Free gate opening function for 1000 phone numbers with caller ID and unlimited numbers without ID
• Remote monitoring with SIA DC-09 protocol: sending inputs status, life signals, and proprietary signals
• Network power supply monitoring with notification sending and uninterruptible operation with optional ProBattery
• 16,000 event memory and continuous GSM signal strength monitoring
• Night mode, where only the output can be controlled
• SMS, PC, and Android programming capabilities

GSM intercom module, 1 apartment version

• 1 apartment intercom with metal push button, microphone, speaker
• 2 relay output which can be controlled by DTMF codes during call
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and android

Universal GSM/4G Caller with Speaker and Microphone

This device can be installed behind an existing or custom front panel and operates as a voice-based universal GSM/4G caller.

• 5 inputs capable of receiving trigger signals
• Ability to assign 8 notifying phone numbers to the inputs
• Voice communication is established with the called number through the speaker and microphone
• 2 relay outputs, controllable during calls with DTMF codes or remotely via call or SMS
• Outputs can be configured as either bistable or monostable
• Free gate opening function for 1000 phone numbers with caller ID and unlimited numbers without ID
• Remote monitoring with SIA DC-09 protocol: sending inputs status, life signals, and proprietary signals
• Network power supply monitoring with notification sending and uninterruptible operation with optional ProBattery
• 16,000 event memory and continuous GSM signal strength monitoring
• Night mode, where only the output can be controlled
• SMS, PC, and Android programming capabilities

GSM intercom module, green version

• InterCom GSM with metal push button, microphone, speaker
• 2 relay output which DTMF codes can control during call
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• LED lighting
• Programming by SMS, PC and Android

GSM intercom module, 2 apartments version

• 2 apartments intercom with metal push buttons, microphone, speaker
• 2 relay output which can be controlled by DTMF codes during a call
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and Android

GSM intercom module, emergency version

• Intercom GSM with metal push button, microphone, speaker
• With customizable inscription (fire, help, etc.)
• 2 relay output which can be controlled by DTMF codes during call
• Free gate opener function from 1000 phone numbers
• Power monitoring, optional ProBattery for uninterrupted operation
• Event log of 16.000 entries, continuous GSM signal strength monitoring
• Night shift mode: a time interval can be set when the module will not forward incoming calls
• Programming by SMS, PC and android

GSM Caller with Speaker and Microphone, flush-mounted

A voice-based universal GSM caller is a flush-mounted GSM module with a speaker and microphone.

• 1-button emergency caller with metal button, microphone, and speaker
• 3 free NO/NC contact inputs with SMS and voice message sending
• Up to 8 phone numbers can be assigned to the inputs for notification
• Voice communication is established with the called number via the speaker and microphone
• Adjustable volume and microphone sensitivity (using ProRead software)
• GPRS remote monitoring reporting with SIA DC-09 and Enigma protocol: sending signals from inputs, heartbeat, and system alerts
• 2 relay outputs controllable via DTMF codes during calls
• Outputs can operate in bistable or monostable mode
• Free output control from 1000 phone numbers with caller ID recognition, unlimited numbers without identification
• Tamper-protected housing
• Mains power monitoring with notification and uninterrupted operation using the ProBattery (optional)
• Flush-mounted design with optional frames
• Event memory for up to 16,000 events, continuous GSM signal monitoring
• SMS, PC, and Android programming

GSM caller system with speaker and microphone, wall-mounted design

The wall-mounted GSM module with speaker and microphone functions as a voice-based GSM caller.

• 1-button emergency caller with metal button, microphone, and speaker
• 3 free NO/NC contact inputs with SMS and voice message sending
• Up to 8 phone numbers can be assigned to the inputs for notification
• Voice communication is established with the called number via the speaker and microphone
• Adjustable volume and microphone sensitivity (using ProRead software)
• GPRS remote monitoring reporting with SIA DC-09 and Enigma protocol: sending signals from inputs, heartbeat, and system alerts
• 2 relay outputs controllable via DTMF codes during calls
• Outputs can operate in bistable or monostable mode
• Free output control from 1000 phone numbers with caller ID recognition, unlimited numbers without identification
• Tamper-protected housing
• Mains power monitoring with notification and uninterrupted operation using the ProBattery (optional)
• Wall-mounted design
• Event memory for up to 16,000 events, continuous GSM signal monitoring
• SMS, PC, and Android programming